Automatic Hydrogen Sulfide in Fuel Oils Tester
ASTM D762
Model: JF7621
Product Introduction:
The instrument is designed and manufactured in accordance with the requirements of the ASTM IP test standard. A small amount of sample is diluted with a diluent and heated to 60°C in a metal bath under precise temperature control to release the H2S in the sample. Use a clean Air is used as the carrier gas, H2S is carried into the measuring cell of the electrochemical sensor, and the instantaneous concentration of H2S is measured. The air flow is measured and controlled by a digital mass flow meter. When the H2S in the sample is completely released, the instrument will automatically calculate H2S. Cumulative concentration.
Features:
◆Computer control, automatic measurement, automatic calculation of results;
◆The air flow is measured and controlled by a digital mass flow meter;
◆The instrument is designed and manufactured according to the requirements in ASTM and IP test standards;
◆Semiconductor refrigeration gas-phase processor with fast cooling speed;
◆Cadon fisher type glass reaction test tube, easy to operate;
◆Luer type sintered filter, filled with special adsorbent;
◆Cadon H2S200 detection system, can read directly;
◆Quick screwing gland, self-sealing;
Parameter:
Compliant with standards: ASTM D7621 ISO 8217 IP 570
Measuring range: 0-250mg/kg H2S
Working temperature: 15-30℃, RH80%
Viscosity range: up to 3000mm2/s
Detection method: electrochemical sensor
Test time: 15 minutes
Sample quantity: 1ml, 2ml, 5ml
(Determined according to H2S concentration)
Diluent dose: 20mL
Electricity voltage: AC220V±10V 50Hz. ...
Work rate: 300 w
