Lubricating Oil Evaporation Loss Tester (No Wood's metal method)
ASTM D5800 DIN51581 CECL40A93 NFT6616
Model：JF0059
Product Introduction
When making this instrument, put the sample in the evaporation loss tester and heat it for 1 hour under certain conditions, and the evaporated oil will be carried out by the air correctly. Determine the evaporation loss of the sample based on the difference between the mass of the sample before and after heating. The instrument is suitable for lubricants and lubricant base oils.
Technical parameter
1. Applicable standards: ASTM D5800 DIN51581 NFT60616 CECC40A9S SH/T0059
2. Temperature control method: digital display PID temperature control
3. Temperature control range: normal temperature～250±0.5℃
4. Heating method: metal bath heating
5. Pressure adjustment: high density needle valve
6. Suction method: vacuum pump
7. Differential pressure gauge: Imported*dense inclined pipe pressure difference
Performance characteristics
1. Metal bath heating device, safe and environmentally friendly;
2. Imported inclined pipe differential pressure gauge to ensure accurate pressure;
3. Wood alloy is added to the bath body for better heat conduction;
4. Equipped with a special vacuum suction system;
5. Digital timer to record test time;
6. The evaporation crucible meets the requirements of ASTM standards;
7. Double pressure regulating system, one coarse regulating valve and one fine regulating valve;
8. There is a gas buffer bottle inside;
9. High-power solid-state relay controls the heater;
