Abrasiveness of Grease Gear Tester
Product model: JF0427
Product Introduction
This instrument is suitable for evaluating the gear wear value of lubricating grease. The test method is to reciprocate a test gear with known wear performance coated with test grease under a specified load, and use the average mass loss of the copper gear as the wear value after a specified number of cycles.
Technical Parameter:
1. Applicable standard: SH/T0427 FS 791 B335.2
2. Work unit: 4 groups
3. Counting method: rotating counter
4. Operating cycle: 0～6500cy adjustable
5. Power supply: AC220v 50hz
6. Loading weight: 22.24N 44.48N
7. Movement mode: sine curve movement
8. Vibration width: 79.76mm
Main Feature:
1. A set of standard brass gears and steel gears;
2. Two weights of 22.24n and 44.28N;
3. The digital display rotation counter records the working cycle;
4. There is a container box under the steel gear;
5. Stepper motor drive to increase the amplitude;
6. The operating cycle can be adjusted according to requirements;
7. Synchronous belt and synchronous wheel drive, high;
