Kinematic Viscosity Tester ASTM D445
Product Model: Jf265
Product Introduction
This instrument is suitable for measuring the viscosity of petroleum products. The mechanism of this instrument: at a certain constant temperature, measure the time for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity. The product of the capillary constant of the viscometer and the flow time is the temperature at that temperature. Determine the kinematic viscosity of the liquid.
Technical Parameter
1. Applicable standard: ASTM D445 ISO3104 DIN51366
2. Temperature control method: PID digital display thermostat
3. Temperature control: 0-100±0.1℃
4. Heating method: electric heating tube heating
5. Power of the whole machine: 2.5KW
6. Working unit: 2 tubes
7. Power supply: AC220V/50Hz
8: Refrigeration: compressor refrigeration
Main Feature
1. The glass cylinder is used as a heating bath for transparent observation;
2. One-piece structure, easy to operate;
3. Double-layer glass cylinder for heat preservation, the inner cylinder is Φ300×300mm;
4. Four samples can be tested at the same time, which is convenient for making parallel samples;
5. High-power solid-state relay control output, no voltage leakage;
6. There is a stirrer on the electronic heating bath;
7. Stainless steel heater;
8. The thermostat displays the heating status;
9. The shell is made of cold-rolled steel plate, and the surface is treated with electrostatic spray, which has good rust resistance and is easy to clean;
10. Safety facilities can prevent overheating and low water level;
11. It is very convenient to access the control box;
12. Microcomputer controller, PID function, digital display temperature (continuous display during testing), degree 0.1°C, Pt100 RTD temperature probe;
